GSM CELLULAR PHONE BLOCKING SYSTEM

1. Introduction

1) Product : Mobile phone blocking system

2) Model : WaveBank TUNA-Series

3) Model No : WCUT-8019G (GSM)

4) Blocking range : Diameter 20~50m (range is subject to change according to
location or antenna.)

2. General Specification

1) Frequency : GSM 900 (935~960MHz), GSM 1800(1805~1880MHz)

2) Power consumption : less than 35W

3) Power supply : 5V DC / 3A

4) Dimension : 112(W) X 35(H) X 207(D)mm

3. To install / to operate

1) To mount antenna : Antennas should be mounted on the body first. The
system may be harmed by reflection power if the switch is turned on without
antenna.

(Long ANT : LOW BAND) (Short ANT : HIGH BAND)

2) Installation : WCUT-8019G installation is very simple. A bracket is included for
easy installation on the wall or ceiling.

- Mount the bracket on the desired location.

- Put the bolts on the rear side of the body into the holes of the bracket.

- Adjust the body not to move.

*Note : Keep low heat-resistant away from the system. Its surface temperature
goes up to 50??/span> when working.

3) Electrical specification : The standard DC power adapter should be used.
It may be harmful for the system when non-standard adapter is used.

4) Check operation status: Turn on the switch and you will see LED on. All mobile
phones within the range will show ??Not in service?? in one or two minutes.

              5)      To control RF power: WCUT-8019G is using "Dual Control System" . Main RF power
                    is set to the highest level when manufactured from the factory so users don??t
                    have to adjust the main RF power controller. When less coverage is desired,
                    user can adjust sub RF power controller on the bottom of the body. Unscrew
                    "Output co trol" and you will see two blue digital switches. One is for GSM 900 and
                    the other is for GSM 1800. You can adjust the switches for the desired power separately.

- Output Power Control

- Control Output Table

Control Code	ATT Values (dB)	Real Output (dBm)	Remark
0	0 dB	25dBm (average)	Original Value Power Up Power Down
1	2 dB	23 dBm
2	4 dB	21 dBm
3	6 dB	19 dBm
4	8 dB	17 dBm
5	10 dB	15 dBm
6	12 dB	13 dBm
7	14 dB	11 dBm
8	16 dB	9 dBm
9	18 dB	7 dBm
A	20 dB	5 dBm
B	22 dB	3 dBm
C	24 dB	1 dBm
D	26 dB	-1 dBm
E	28 dB	-3 dBm
F	30 dB	-5 dBm

* ATT : Attenuation

4. Application

*Bank or prison/Strong security required place

*Church or Temple/Religious places

*School/Library

*Executive Room/Meeting Room

*Theater/Concert Hall

*Government Facilities/Military Bases

*Hospital/Room with Medical Equipments

here for Intermediate Frequency Repeaters

TDMA 800/1500, GSM 900/1800, CDMA 800/1900, UMTS. WCDMA RF & IF Repeaters

All Research & Development, Design, Produced in Wireless Tsukamoto Japan

GSM Repeater TDMA / CDMA Repeater HANDS FREE Duplex Company Profile 2006


Head Add:	16-21 1-chome, Isoyama, Suzuka-shi, Mie-prefecture, Japan Zip:510-0256
Tel: Fax:	+81-59-387-8000 / +81-59-388-7007 +81-59-387-6999 / +81-59-388-6999

(MODEL: WCUT-8019G) GSM 900 /1800

ATT Values (dB)

(MODEL: WCUT-8019G)
GSM 900 /1800